incl. VAT plus shipping costs. VAT will be removed at checkout for outside EU.
out of stock
- Part number: FET59
- EAN 4260740040018
Features:
FC:
-
Latest STM32G4 Processor
-
170Mhz + Math accelerator
-
MPU6000
-
Supply voltage 12-25V (3S-6S Lipo voltage)
-
2x dedicated onboard 5V BEC for VTX (max. 600mA each)
-
5V BEC for RX
-
5V/16V BEC for VTX (switchable and real Pit*)
-
-
1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
-
VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
-
-
2x 4 pin connector for receiver and VTX
-
Signal, telemetry, 5V, gnd
-
Gnd, 5V, TX1, RX1
-
-
5 UART serials
-
UART 1 free
-
UART 2 used for Receiver
-
UART 3 free
-
UART 4 used for onboard OSD, can be set free
-
UART 5 used for ESCs / TLM / Onewire
-
-
Solder pad for RGB LEDs
-
Supported ESC protocols
-
PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
-
-
KISS FC firmware
*real Pit-Mode: A power supply pin which is remotely switchable
ESC:
-
Active current limiting @ 35A
-
Input voltage: 3s-6s
-
High quality 40V MOSFETs
-
STM32G071 @ 64MHz
-
up to 128 kHz Motor PWM
- Full sine wave control
-
Automatic input signal detection
-
PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
-
-
FETtec ESC firmware
OSD:
-
Onboard OSD
-
Graphic OSD (STM32)
-
Full KISS Tuning
-
Filter (PIDs, Rates, Settings)
-
LED control (RGB LED, Racewire)
-
VTX
-
Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
-
KISS GPS support + live map
-
Custom graphic pilot logo
-
Stick overlay
-
Custom layout
-
can be deactivated for usage of digital systems
-
-
Connector type: JST-SH-1mm
Dimensions:
-
Maximum outside dimensions: 30 x 37,5mm
-
Mounting hole arrangement: 20 x 20mm with M2 mounting hole (expandable to M3)
-
-
Overall height: 7,9mm
-
Weight: 8,9 g
Software:
KISS Firmware - Softwareupdate via FETtec Configurator
FETtec ESCs Firmware - Softwareupdate via FETtec Configurator
FETtec OSD - Softwareupdate via FETtec Configurator
Scope of delivery:
1x FETtec AIO 35A
1x Capacitor 50V 470µF
2x 4 pin cable with JST connector on one side
1x 8 pin cable with JST connector on one side
Standoffs